How To Install and Run EWBF 0.6 for MINEXCOIN on UBUNTU 18.04
login
sudo bash
apt-get update
apt-get dist-upgrade
apt-get install gcc libglu1-mesa libxi-dev libxmu-dev libglu1-mesa-dev screen
lspci | grep -i nvidia
Check to see if all gpus are listed
apt-get install linux-headers-$(uname -r)
mkdir /miner && mkdir /miner/drivers/ && mkdir /miner/drivers/ewbf && mkdir /miner/drivers/intel && mkdir /miner/drivers/nvidia
add-apt-repository ppa:graphics-drivers/ppa
apt-get update
apt-get install nvidia-driver-410
reboot
nvidia-smi
cd /miner/drivers/ewbf
wget
tar xf EWBF*.gz
cd EW*
nano start.sh
#!/bin/sh
nvidia-smi -pm 1
nvidia-smi -acp 0
nvidia-smi -pl 300
sleep 2
export GPU_FORCE_64BIT_PTR=0
export GPU_MAX_HEAP_SIZE=100
export GPU_USE_SYNC_OBJECTS=1
export GPU_MAX_ALLOC_PERCENT=100
export GPU_SINGLE_ALLOC_PERCENT=100
./miner –algo 96_5 –server stratum.minexpool.eu –port 3333 –user XaaXTPw4UwL8xnkdStHTCCMRXAWB8Ek1er.tacticalware –pass x –templimit 85 –solver 0 –pec 0
Save, Exit, and then
chmod +x start.sh
screen ./start.sh
Now check your miner periodically to see if it is running, inserting your wallet address in place of my wallet (XaaXTPw4UwL8xnkdStHTCCMRXAWB8Ek1er):
!miner/XaaXTPw4UwL8xnkdStHTCCMRXAWB8Ek1er
And you are done!
The hardware that I used in this guide:
Gigabyte AORUS GeForce GTX 1080 Ti (QTY 6):
https://amzn.to/2JqvXC8
Motherboard (QTY 1):
https://amzn.to/2JqGJZ7
CPU (QTY 1):
https://amzn.to/3qevp2X
Memory (QTY 1):
https://amzn.to/2JqHn8Z
Hard Drive (QTY 1):
https://amzn.to/3lic3X5
Risers (QTY 6):
https://amzn.to/33rIgVE
Power Supplies (QTY 2):
https://amzn.to/3fTRpLR
Add2PSU (QTY 1):
https://amzn.to/39s4URY
Power Switch (QTY 1):
https://amzn.to/3ljmNVk
Thanks for reading!
