Skip to content
Home » DRONE

DRONE

BIND DJI GOGGLES 3 to CINELOG 30 O4 PRO

  • DRONE

Make sure the FIRMWARE IS THE SAME VERSION. If it is not, follow my other guide on updating the Goggles 3 firmware.

Turn on the Goggles

Hold the power button down until it starts beeping

Turn on the Cinelog30 v3 O4 Pro

Open the black hatch in the center of the drone (underside)

find the BIND button and use a paperclip to press and hold that.

Look back inside your goggles. it will prompt you to switch. Select SWITCH

the goggles will bind to the drone!

Next connect the drone to your PC and launch the DJI ASSISTANT 2

Update the firmware on the O4 Air unit

Reboot the drone
DOWNLOAD AND INSTALL BETAFLIGHT

And then open BETAFLIGHT, connect to the drone and test the controls. if all is well it will work.

UPDATE DJI GOGGLES 3 WITHOUT A DRONE

  • DRONE

To do this you will need to update the goggles from your desktop.

Download the DJI ASSISTANT 2 CONSUMER DRONE application and install it

Once it is installed, connect your DJI GOGGLES 3 to the computer via USB
The goggles will not be connected to the software yet.

Go into the goggles menu
Scroll down and select SETTINGS
Select ABOUT
Then select OTG WIRED TO COMPUTER
This will say CONNECTED NOW

GO back to the desktop computer application and your GOGGLES 3 will appear.

Now you can update the firmware