Skip to content
Home » Operating System » INSTALL MONGODB ON RASPBERRY PI 4

INSTALL MONGODB ON RASPBERRY PI 4

By far the best guide I have found, in starting this journey, was written by Mark Smith on https://developer.mongodb.com/how-to/mongodb-on-raspberry-pi/

If you want to see why things work the way they do, please visit his guide. My guide below is just the commands, and how I am connecting into the database once it is setup.

To begin, first you will want to install Ubuntu Server 20.10 as described here:
https://tacticalware.com/install-ubuntu-server-20-10-64-bit-on-raspberry-pi-4-using-a-m-2-drive/

Once you are up and running, ssh into the Raspberry Pi
Login

From the terminal run the following:
sudo bash

wget -qO – https://www.mongodb.org/static/pgp/server-4.4.asc | sudo apt-key add –

echo “deb [ arch=amd64,arm64 ] https://repo.mongodb.org/apt/ubuntu focal/mongodb-org/4.4 multiverse” | tee /etc/apt/sources.list.d/mongodb-org-4.4.list

apt-get update

apt-get install -y mongodb-org

systemctl daemon-reload

systemctl enable mongod

systemctl start mongod

systemctl status mongod

CTRL button +c to exit

mongo
use admin

db.createUser( { user: "admin",
 
        pwd: "SuperSecretPassword",

        roles: [ "userAdminAnyDatabase",

                 "dbAdminAnyDatabase",

                 "readWriteAnyDatabase"] } )

exit

nano /etc/mongod.conf

Add these lines to the end of the file

security:

   authorization: enabled

CTRL +x to Exit
Y to Save

systemctl restart mongod

mongo

db.adminCommand({listDatabases: 1})

Make sure you had no errors

exit

mongo -u “admin” -p

Enter your admin password for mongo, aks your SuperSecretPassword

Type
db.adminCommand({listDatabases: 1})
This will list out your databases and ensure you created it properly

exit

nano /etc/mongod.conf
and Change the bind ip from 127.0.0.1 to 0.0.0.0

net:
   port: 27017
   bindIp: 0.0.0.0

CTRL +x to Exit
Y to Save

systemctl restart mongod

ufw allow 27017/tcp

MongoDB is now successfully setup and running. On to configuring the Windows 10 system

To connect to the MongoDB from a Windows 10 computer

Open an Internet Browser on your Windows 10 computer
Navigate to https://robomongo.org/
Download the Robomongo Robo 3T Client
Once you install it, add these settings to connect to your system
Click Create
Connection Tab
Type – Direct Connection
Address – The IP of your Raspberry Pi
Port 27017
Authentication Tab
Check mark Perform Authentication
Database is admin
User Name is admin
Password is your SuperSecretPassword
Auth is SCRAM
Click Save
Click Connect

You are now connected and ready to run with your MongoDB environment

Hardware that I used:
Raspberry Pi 4 (4gb)
https://amzn.to/3q551IO

CanaKit 3.5A Raspberry Pi 4 Power Supply (USB-C)
https://amzn.to/3fNTYPu

CanaKit Raspberry Pi 4 Micro HDMI Cable – 6 Feet
https://amzn.to/33u5hr9

Western Digital 500GB WD_Black SN750 NVMe
https://amzn.to/3nZ5pH4

Plugable USB C to M.2 NVMe Tool-free Enclosure
https://amzn.to/3lflV3L

Tags: