Flightaware…an amazing app, will give you a free subscription if you monitor the skies above your house. To setup a raspberry pi with this ability, perform the following
This guide assumes you have a Raspberry Pi, already setup with Raspbian. If you don’t have this, follow the guide below:
https://tacticalware.com/install-raspbian-os-on-raspberry-pi-4/
Once you are up and running with your Raspberry Pi, you will need to plug in your flightaware usb dongle which can be found on the bottom of this page
After that, run the following commands:
From your Raspberry Pi “Desktop”
Open a terminal
sudo bash
apt-get update
apt dist-upgrade
reboot
Your system will now reboot and come back up to your “Desktop”
Open a terminal
sudo bash
wget http://flightaware.com/adsb/piaware/files/packages/pool/piaware/p/piaware-support/piaware-repository_3.7.1_all.deb
dpkg -i piaware-repository_3.7.1.deb
apt-get update
apt-get install piaware
piaware-config allow-auto-updates yes
apt-get install dump1090-fa
reboot
Your system will now reboot and come back up to your “Desktop”
Open a terminal
sudo bash
ifconfig
get the ip address of your Pi
Open the Chromium web browser on your Raspberry Pi
Navigate to https://flightaware.com/adsb/piaware/claim
Create an account or Login and claim your piaware.
If successful you will see a message similar to the following message on the web page:
PiAware – Claim and Link a Brand New PiAware Ground Station
Success!
You claimed the following 1 receivers:
162323d5-6532-4s436-9486-d6173334
Next you will want to click on the link listed in your Success message:
Great news! Your account is associated with the following PiAware receivers and you can view your statistics here:
Now you will be in the config page of your flightaware account
So you will want to click on the Gear icon
Configure your location and the height of the antenna
And you are done!
You are now monitoring the sky overhead
Hardware I used:
Raspberry Pi 4 (4gb)
https://amzn.to/3q551IO
SanDisk 32GB Ultra microSDHC UHS-I Memory Card with Adapter
https://amzn.to/2Vfvo0y
CanaKit 3.5A Raspberry Pi 4 Power Supply (USB-C)
https://amzn.to/3fNTYPu
CanaKit Raspberry Pi 4 Micro HDMI Cable – 6 Feet
https://amzn.to/33u5hr9
SanDisk MobileMate USB 3.0 microSD Card Reader (Only needed if you dont have a Micro SD Reader/Writer slot in your computer)
https://amzn.to/39toi0G
Flightaware USB Stick
https://amzn.to/3aFKpju
Flightaware Antenna
https://amzn.to/3pZ3yn3
